Please find attached picture to show you our problem with a recently serviced Pack22-TA compressor. Can you offer any explanation
for why this would be happening? There seems to be oil getting into main air tank & you can see in photo it coming outof the drain. I await your reply.
Hi Luke Simmons
If find too much lubricate oil go out to air tank, the possible reasons are follows
1.oil separator is fail, normally replace separator every 2000hrs running time, its better replace oil and oil filter at same time.
2.Fill too much oil into compressor, the suitable oil level is between oil view glass range max-min
3.Oil return valve (one-way valve) blocked, clean or replace it
4.Working pressure is always too low, less than 0.6Mpa
5.Bad lubricate oil be used, take too much foam when compressor running
Regular maintance need(1 year/ 4000 hrs), for pack5 and pack7 screw compressor
here is the order:
Pack5-TA 230V 1 Phase 60Hz (Invoice #: DMC-inv20100216)
F9-2, F7-2, F5-2 (Invoice #: DMC-inv20100217)
Also we need the replacement filters for Pack7. For that I dont have the part # and no price/invoice. No rush on that one, but if you can send it in one shippment, we can save shipping cost.
Thursday 2010/2/18, 22:08
regular maintance need(1 year/ 4000 hrs), for pack5 and pack7 screw compressor
intake filter 2pcs
oil filter 2pcs
oil/air separator 2pcs
V belt 2pcs
Synthetic lubricate oil 10liters
of course , you don't pay extra shipping cost if send together with compressor.